The bell pepper decoring machine has a capacity of approx. 6000 pieces/hour with two operators.
The bell pepper decoring machine can handle bell peppers with a diameter of 50 mm till 120 mm. The machine can be adjusted to process bell peppers ranging in height
from 65 mm till 165 mm and from 100 mm
till 200 mm.
– High man-hour capacity with one or
– Intelligent Customized Decoring® concept assuring a perfectly decored end-product, almost free of loose seeds
– Easy to operate and easy to clean
– Automatic centering of the bell pepper, automatically determined coring depth
– Adapted coring machine can also be used
to remove the center part of the onion
and cutting of the onion into shashlick- parts, to quarter tomatoes and to decore and segment apples.
Up to four bell peppers can be placed
manually in the clamping system, by one or two operators. As the clamps are closed the bell pepper is automatically centered.
The drum holding the bell peppers is turning stepwise. In the first rotational step all green stems of the bell peppers are cut off. At the next rotational step the height of the bell peppers is sensed and used to set the coring depth. The coring is performed by pneumatic coring devices. With an overpressure air system the inside of the bell peppers are cleaned. All cores, loose seeds and stems etc. are separately collected on a feeding out belt. At the next step the cored and cleaned bell peppers are cut into pieces lengthwise by a pneumatic segmenting station. Depending on the knife section in the segmenting station, the bell peppers can be cut into halves or quarters. The cut end-product is fed out underneath the machine and can be collected on a feed out belt (optional).
The machine is equipped with a control panel, standard with a 4-cut segmenting station and a receiving bin for the waste.
– Product feed in belt
– Feed out belt for divided end-product
– Feed out belt for the waste
– Segmenting station with knife sections for
2 parts and 8 parts
The machine and control panel are fully made of stainless steel 304 and synthetic materials.
Length x width x height (mm):
approx. 2.175 x 1.960 x 1.655 mm
Length x width x height (inch):
approx. 86 x 77 x 65 inch
200 liter/minute (clean and dry air), 6 bar
approx. 800 kg
0,28 kW, IP55
0,18 kW, IP55
Feeding out belt end product:
0,12 kW, IP55 (optional)
Feeding out belt waste:
0,12 kW, IP55 (optional)
Connection voltage US:
208-480 V, 3 Phase, 50/60 Hz
Connection voltage EU: